College 2 / COLLEGE2 3000-840 HF E3DUK L1500

96800160

Data Sheet

A high performance, surface mounted and suspended, LED luminaire. Electronic, fixed output control gear Luminaire with local battery supply for 3 hr. emergency lighting in maintained or non-maintained mode, with automatic test (auto-test) via the luminaire, optional central monitoring via DALI, display of luminaire status via status LED. Class I electrical, IP44. Body: white painted steel. End caps: white polycarbonate with a curved, precision extruded clear prismatic polycarbonate. Qty 4 x M20 cable entry holes in the centre of the back spine with optional cable entry through each end cap. Fitting supplied with sealing grommets and innovative "quick fix" horseshoe and sliding washers for direct screw fixing to surface, fixing centres mm. Standard BESA fixings. Can be suspended using wire suspension accessory kit (to be ordered separately). 4 x 2 x 2.5mm² piano key terminal block. Complete with 4000K LED

Dimensions: 1542 x 195 x 82 mm
Luminaire input power: 25.9 W
Luminaire luminous flux: 3320 lm
Luminaire efficacy: 128 lm/W
Weight: 5.05 kg

Mode selection
  • Lamp position:STD - standard
  • Light Source:LED
  • Luminaire luminous flux*:3320 lm
  • Total emergency luminous flux:600 lm
  • Luminaire efficacy*:128 lm/W
  • Colour Rendering Index min.:80
  • Ballast 1:1 x 28000713 LC 75W 100-400mA flexC lp EXC
  • Ballast 2:1 x 89800903 EMconverterLED PRO 202A MH/LiFePO4 250V
  • Correlated colour temperature*:4000 Kelvin
  • Rated median useful life*:L80 100000 h at 25 °C
  • Luminaire input power*:25.9 W Power factor = 0.95
  • Dimming:FO
  • LED
  • IK05
  • IP44
  • RCM
  • SC1
  • Ta = 0 to +25
  • UKCA

Photometry

Photometric configuration

CalcExpress

Use CalcExpress to quickly carry out quick online calculations of required indoor luminaire numbers for rectangular rooms. Enter the calculation parameters for your solution such as room dimensions, mounting height, height of the useful plane and required level of illuminance, and the site will instantly suggest a solution according to the light output ratio method.

Step 1: Technical data
(lm)
(m)
(m)
(%)
Step 2: Room Data
(m)
(m)
(m)
(m)
(%)
Step 3: Result
(lx)
(%)